Ara
Toplam kayıt 12, listelenen: 1-10
Effect of Secondary Phases on 475°C Embrittlement of 1.4462 and 1.4501 Duplex Stainless Steels at Short-term Heat Treatment Conditions
(IOP Publishing Ltd, 2019)
Duplex stainless steels (DSSs) are classified according to their chemical composition. Also, the
formation of the secondary phases can be defined as a main problem of the DSSs. In this study,
decomposition of chromium ...
Influence of The Phase Balance and Cooling Conditions on The Microstructure and Corrosion Behavior of Solution-treated 1.4462 Duplex Stainless Steel
(IOP Publishing, 2019)
In this study, effect of cooling rate on the microstructure and corrosion behavior of the solutiontreated
1.4462 alloy was investigated. 1.4462 alloy was heat-treated at 1000 °C, 1120 °Cand 1200 °C
for different duration ...
Cooling Slope Casting of AA7075 Alloy Combined with Reheating and Thixoforging
(Elsevier, 2019)
Cooling slope casting has been applied to aluminium casting alloys for producing ingots with non-dendritic
microstructure. Semi-solid forming of the AA7075 was studied via cooling slope casting, reheating and thixoforging ...
Investigation of the Relationship Between Intergranular Corrosion and Retrogression and Reaging in the AA6063
(Wiley Online Library, 2019)
AA6063 was heat treated with different retrogression temperatures and
durations, and the effect of heat treatment conditions on the microstructure,
hardness, electrical conductivity, intergranular corrosion (IGC) and ...
Effect of Heat Treatments on the Microstructure and Wear Behaviour of A Selective Laser Melted Maraging Steel
(SAGE, 2022)
This study applied classical and intercritical heat treatments to maraging steel (MS1) samples produced with standard additive manufacturing (AM) production parameters. The effects of heat treatment parameters on the ...
Dry Sliding Wear Behavior of Energy Density Dependent PA 12/Cu Composites Produced by Selective Laser Sintering
(De Gruyter, 2023)
The selective laser sintering process is widely
used to fabricate polyamide matrix composites. Although
various reinforcements are used to produce polyamide
matrix composites, metallic-based reinforcements are used
to ...
Precipitation of Carbides in A Nickel-Based Cast Heat-Resistant Alloy During Thermal Exposure: Evolution of Microstructure, Hardness and Corrosion Properties
(De Gruyter, 2023)
Ni-based G-NiCr28W alloy, which is widely preferred
in high-temperature applications, has an austenite matrix as
well as carbides dispersed in the structure. The morphology of
the carbides in the structure varies depending ...
Effect of Waste Titanium Chips Addition Into the Aluminum Alloys on Their Microstructure
(Gazi Üniversitesi, 2021)
In the present study, turning chips were preferred to add titanium into liquid aluminum. Although being easy to reach and cheap, the chips were thought to be effective in minor titanium addition with their large surface ...
Electrochemical Corrosion Behaviour of UNS S32205 Duplex Stainless Steel Dependent on Sigma Phase Precipitation
(De Gruyter, 2024)
In this study, the microstructure and electrochemical corrosion behavior of the UNS S32205 alloy were investigated. Firstly, the phase diagram of the studied samples was determined by Thermo-Calc 2022 software, and the ...
Influence of High-Velocity Oxy-fuel Sprayed Cr3C2-NiCr Coating on Corrosion and Wear Properties of AISI 2205
(Springer, 2024)
In this study, Cr3C2/10%NiCr layer was deposited on the AISI 2205 duplex stainless steel by the HVOF
technique. Microstructural, tribological and corrosion behaviors of the coated and uncoated samples were
investigated. ...