FSM Vakıf University Institutional RepositoryDSpace dijital arşiv sistemi toplar, depolar, dizinler, korur ve dijital araştırma materyallerini dağıtmaya aracılık eder.https://acikerisim.fsm.edu.tr:443/xmlui2024-03-28T14:22:20Z2024-03-28T14:22:20ZKütüphane Bülteni, 5https://hdl.handle.net/11352/48812024-03-25T10:54:16Z2024-01-01T00:00:00ZKütüphane Bülteni, 5
Kütüphane kelimesi Arapça ktb kökünden gelen kutub “kitaplar” ve Farsça xâne “ev” sözcüklerinin bir araya gelmesinden oluşmuştur. Kütüphane kelimesinin aslı Eski Yunanca bibliotheke, Latince’ye bibliotheca olarak geçmiştir. Bibliotheke kelimesi iki ayrı kelime Biblos veya byblos ile theke kelimelerinin bir araya gelmesiyle oluşmuştur. Byblos, papirüs yapraklarının oluşmasını sağlayan, bitkinin özüne denmektedir. Bu kelime daha sonra bir kitap şekli olan papirüs rulosu ve daha sonraları bulunacak olan parşömen kodeksi içinde kullanılmıştır. Theke kelimesi ise herhangi bir şeyi içine alan koruyan, saklayan eşya anlamındadır. Ortaya çıkan bybliontheke kitapların muhafaza edildiği yer olarak düşünülebilir. Sonraları libraria kelimesi de kullanılmıştır. Bu kelime kitap anlamına gelen liber kelimesi ile bağlantılıdır. Kütüphane kelimesinin bu günkü anlamda ilk kullanımı İskenderiye Kütüphanesiyle beraber olmuştur.
2024-01-01T00:00:00ZDevelopment of an Alternative Heat Treatment to the Traditional T6 Heat Treatment of AlSi10Mg Alloy Produced by Additive ManufacturingTütük, İbrahimUral, Mehmet MoğoltayYılmaz, Mustafa SafaÖzer, Gökhanhttps://hdl.handle.net/11352/48802024-03-22T09:59:44Z2024-01-01T00:00:00ZDevelopment of an Alternative Heat Treatment to the Traditional T6 Heat Treatment of AlSi10Mg Alloy Produced by Additive Manufacturing
Tütük, İbrahim; Ural, Mehmet Moğoltay; Yılmaz, Mustafa Safa; Özer, Gökhan
In this study, alternative solution heat treatments, applied at lower temperatures and shorter times, were
applied to AlSI10Mg samples produced with the powder bed laser fusion technique. Thermocalc software
was used to determine the temperatures of the NT6 solution heat treatment. The samples were analyzed by
optical microscope, scanning electron microscope, energy-dispersive x-ray analysis, x-ray diffractometer
and their mechanical behavior was examined. The results were compared with traditional T6 heat treatments
and it was determined that the samples showed better ductility after NT6 heat treatments while
maintaining the strength values in the traditional method.
2024-01-01T00:00:00ZA Bi-Objective Traffic Signal Optimization Model for Mixed Traffic Concerning Pedestrian DelaysAkyol, GörkemSilgu, Mehmet AliÇelikoğlu, Hilmi BerkGöncü, Sadullahhttps://hdl.handle.net/11352/48792024-03-22T09:58:02Z2024-01-01T00:00:00ZA Bi-Objective Traffic Signal Optimization Model for Mixed Traffic Concerning Pedestrian Delays
Akyol, Görkem; Silgu, Mehmet Ali; Çelikoğlu, Hilmi Berk; Göncü, Sadullah
Urban traffic networks suffer in numerous ways from traffic congestion. Some of these adverse effects are increased travel times
of cars, buses, bicycle users, pedestrians etc., with the addition of excessive greenhouse gas emissions. Transportation engineers
and policy makers try to improve the quality of urban transportation systems by developing projects to enhance the pedestrian
experience, reduce private car usage, reduce total time spent in the network through different control strategies, and diminish the
detrimental effects. In this context, this study takes Connected and Automated Vehicles (CAVs) and pedestrians into account at
signal-controlled intersections. A novel intersection signal control optimization methodology that incorporates pedestrian delays
and vehicular emissions from CAVs is presented. Non-dominated sorting genetic algorithm-II is utilized to solve the multiobjective
optimization problem. For the emission calculations, the MOVES3 emission model is utilized. The proposed framework is tested
on real-world case study. Simulation experiments showed major improvements in pedestrian delays and lower emissions.
2024-01-01T00:00:00ZÖğrenci Yurtları Ortak Kullanım Alanlarının Mekân Kalitesi Bağlamında İncelenmesiMubarek, Ahmed Talathttps://hdl.handle.net/11352/48782024-03-22T07:53:25Z2023-01-01T00:00:00ZÖğrenci Yurtları Ortak Kullanım Alanlarının Mekân Kalitesi Bağlamında İncelenmesi
Mubarek, Ahmed Talat
Bu çalışmanım öncelikli amacı, söz konusu durumdaki Ateş Corner Öğrenci Yurdu (ACOY) öğrencilerinin fiziksel, psikolojik ve sosyal özelliklerine ilişkin memnuniyet düzeylerini ölçmektir. Çalışma dört ana bölümden oluşmaktadır. Birinci bölümde araştırmanın konusuna genel bir giriş, araştırmanın amacı, soruları ve önemi yer almaktadır. İkinci bölüm, öğrenci yurtlarının kapsamlı bir şekilde anlaşılmasını sağlayan genel teorik çerçeveyi ele almaktadır. Üçüncü bölüm, incelenmekte olan öğrenci yurdunun kullanılmaktaki durumunu, teorik ve mekän tanımlarını ele alır. Dördüncü bölüm ise, birçok yurt yatırım projesinin bu konuda düşündürebiliceği yüksek verimliliğe sahip bir öğrenci yurdu önerisini gözden geçirmektedir. Çalışmanın sonucunda, öğrenci yurdunun bazı lüks unsurlar haricinde uluslararası düzeyde genel standartların çoğunu uyguladığı ve öğrencilerın, yunfun sahip olduğu fiziksel, psikolojik, sosyal özelliklerinden memnuniyet düzeylerinin tatmin edici seviyede olduğu tespit edilmiştir. Bu konuda çalışan araştırmacılara, yurt yönetimlerinin, bu çalışmada incelendiği üzere, karşılanmayan psikolojik, sosyal ve fiziksel gereklilikler hakkında bilgi edindirmek ve yurtlarda kalan öğrencilerle yıllık veya üç ayda bir periyodik görüşmeler yapılması tavsiye edilmektedir. Bununla birlikte öğrenci yurtlarına ilişkin, şikayetlerin ve beklentilerin periyodik olarak gözden geçirilmesini ve öğrenci misafirler için daha fazla verimlilik ve rahatlık sağlamak üzere mümkün olduğunca çok sayıda ilgili markanın dahil edilmesini içeren çalışmaların yapılması önerilmektedir.; This study aimed to present a general theoretical framework about stodent dormitories in Turkey in general and specifically, and to explain a real example of one of these dormitories and to what extent it has been applied to approved Turkish standards for this service sector. The primary purpose of this study is to measure the satisfaction levels of the students of Ateş Corner Student Dormitory (ACOY) regarding their physical, psychological and social characteristics. The study consists of four main parts. In the first chapter, there is a general introduction to the subject of the research, the purpose, questions and importance of the research. The second part deals with the general theoretical framework that provides a comprehensive understanding of the dormitories. The third chapter deals with the current state of use, theoretical and spatial definitions of the student dormitory under investigation. The fourth section reviews the proposal for a highly efficient student dormitory that many dormitory investment projects might suggest. As a result of the study, it has been determined that the student dormitory applies most of the general standards at the international level, except for some luxury elementsand the satisfaction levels of the students with the physical, psychological and social features of the dormitory are at a satisfactory level. Researchers working on this subject are advised to provide information about the unmet psychological, social and physical requirements of dormitory administrations as examined in this study, and to conduct annual or quarterly periodic meetings with students staying in dormitories. However, it is recommended that studies be carried out on student dormitories that include periodic review of complaints and expectations and involving as many relevant authorities as possible to provide greater efficiency and convenience for student guests.
2023-01-01T00:00:00Z