Ara
Toplam kayıt 6, listelenen: 1-6
Effect of HIP Process and Subsequent Heat Treatment on Microstructure and Mechanical Properties of Direct Metal Laser Sintered AlSi10Mg Alloy
(Emerald, 2020)
Purpose – The purpose of this paper is to evaluate the effect of post process combinations, e.g. hot isostatic pressing (HIP) only, HIP 1 T6 heat
treatments, and T6 only, with different aging time, on surface properties, ...
Effect of RRA Heat Treatment on Corrosion and Mechanical Properties of AA7075
(Wiley, 2019)
In this study, a retrogression process (R) has been applied to AA7075 at
180, 240, and 370°C for 15, 30, 90, and 120 min. After the retrogression,
reaging treatment (RA) was reapplied with T6 conditions (120°C for 24 ...
The Effect of Retrogression and Re-Aging Treatment on Mechanical and Tribological Features of AA7075 Aluminium Alloy
(Wiley-VCH GmbH, 2019)
In this study, T651-applied AA7075 alloy was subjected to retrogression and reaging (RRA) process. Various retrogression temperatures (180 °C, 280 °C, 370 °
C) and times (15 min, 30 min, 90 min) were used to determine the ...
Effects of Retrogression and Reaging Heat Treatment on the Microstructure, Exfoliation Corrosion, Electrical Conductivity, and Mechanical Properties of AA7050
(Wiley, 2019)
The effects of different retrogression times and temperatures on the
microstructure, electrical conductivity, exfoliation corrosion (EXCO), and
hardness of the 7050 aluminium alloy were compared with the T6 and ...
Investigation of the Effects of Different Heat Treatment Parameters on the Corrosion and Mechanical Properties of the AlSi10Mg Alloy Produced with Direct Metal Laser Sintering
(Wiley Online Library, 2019)
In this study, AlSi10Mg samples produced by the direct metal laser sintering
(DMLS) method were applied to heat treatment with different parameters (stress
relief and T6). Heat‐treated and as‐built samples were subjected ...
Heat Treatment, Microstructure and Corrosion Relationship on 316L SS Produced by AM
(Taylor & Francıs Ltd., 2022)
In this study, 316L stainless steel (SS) samples produced with standard parameters using the
Additive Manufacturing method were heat treated with different parameters, and the effects of
heat treatment on the microstructure, ...