Basit öğe kaydını göster

dc.contributor.authorÖter, Zafer Çağatay
dc.contributor.authorÇoşkun, Mert
dc.contributor.authorAkça, Yaşar
dc.contributor.authorSürmen, Ömer
dc.contributor.authorYılmaz, Mustafa Safa
dc.contributor.authorÖzer, Gökhan
dc.contributor.authorTarakçı, Gürkan
dc.contributor.authorKhan, Hamaid Mahmood
dc.contributor.authorKoç, Ebubekir
dc.date.accessioned2021-04-30T13:16:34Z
dc.date.available2021-04-30T13:16:34Z
dc.date.issued2019en_US
dc.identifier.citationÖTER, Zafer Çağatay, Mert ÇOŞKUN, Yaşar AKÇA, Ömer SÜRMEN, Mustafa Safa YILMAZ, Gökhan ÖZER, Gürkan TARAKÇI, Hamaid Mahmood KHAN & Ebubekir KOÇ. "Support Optimization for Overhanging Parts in Direct Metal Laser Sintering". Optics, 181 (2019): 575-581.en_US
dc.identifier.urihttps://hdl.handle.net/11352/3400
dc.description.abstractThe present work focuses mainly on the utilization of different support profiles for overhang structures in EOS M290 Direct Metal Laser Sintering (DMLS) machine. Maraging steel (MS1) parts with large overhangs were produced using various support parameters to reveal the effects of support profile on dimensional stability of overhang structures and surface quality of the downward facing surfaces. Overhangs supported by weak support profiles require less post processing due to easy support removal and low surface roughness values at the cost of dimensional stability. On the other hand, parts with stronger support profiles are less prone to thermal warping and provided better dimensional stability at the cost of surface quality. The hardness shows no remarkable variation along the overhang surface in the same structure as well as between different parts. The study reveals that the designer should choose different support assemblies depending upon the overhang surface size and location.en_US
dc.language.isoengen_US
dc.publisherElsevieren_US
dc.relation.isversionof10.1016/j.ijleo.2018.12.072en_US
dc.rightsinfo:eu-repo/semantics/embargoedAccessen_US
dc.subjectLaser Sinteringen_US
dc.subjectAdditive Manufacturingen_US
dc.subjectMaraging Steelen_US
dc.subjectSupporten_US
dc.subjectOverhangen_US
dc.titleSupport Optimization for Overhanging Parts in Direct Metal Laser Sinteringen_US
dc.typearticleen_US
dc.relation.journalOpticsen_US
dc.contributor.departmentFSM Vakıf Üniversitesi, Rektörlük, Alüminyum Test Eğitim ve Araştırma Merkezi (ALUTEAM)en_US
dc.identifier.volume181en_US
dc.identifier.startpage575en_US
dc.identifier.endpage581en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.contributor.institutionauthorÖter, Zafer Çağatay
dc.contributor.institutionauthorÇoşkun, Mert
dc.contributor.institutionauthorAkça, Yaşar
dc.contributor.institutionauthorSürmen, Ömer
dc.contributor.institutionauthorYılmaz, Mustafa Safa
dc.contributor.institutionauthorÖzer, Gökhan
dc.contributor.institutionauthorTarakçı, Gürkan
dc.contributor.institutionauthorKoç, Ebubekir


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster