Başlık için Merkezler / Centers listeleme
Toplam kayıt 129, listelenen: 60-79
-
The Impact of Aging and Drag-Finishing on The Surface Integrity and Corrosion Behavior of The Selective Laser Melted Maraging Steel Samples
(Wiley-VCH GmbH, 2021)The maraging steel components fabricated using the selective laser melting process exhibit remarkable static strength. However, high pore density and large surface imperfections impede their overall mechanical and chemical ... -
An Improved Bees Algorithm for Training Deep Recurrent Networks for Sentiment Classification
(MDPI, 2021)Recurrent neural networks (RNNs) are powerful tools for learning information from temporal sequences. Designing an optimum deep RNN is difficult due to configuration and training issues, such as vanishing and exploding ... -
Improvement of Corrosion Resistance of Maraging Steel Manufactured by Selective Laser Melting Through Intercritical Heat Treatment
(Natl Assoc Corrosion Eng, 2022)Selective laser melting allows the layerwise fabrication of bespoke designs, creating new prospects in applications and properties compared to conventional methods. Like other ultra-high-strength steels, maraging steels ... -
Improving the Surface Quality and Mechanical Properties of Selective Laser Sintered PA2200 Components by the Vibratory Surface Finishing Process
(Springer, 2021)This paper attempts to improve the physical and mechanical properties of selective laser sintered polyamide PA2200 components through a vibratory surface finishing process by inducing severe plastic deformation at the ... -
Influence of High-Velocity Oxy-fuel Sprayed Cr3C2-NiCr Coating on Corrosion and Wear Properties of AISI 2205
(Springer, 2024)In this study, Cr3C2/10%NiCr layer was deposited on the AISI 2205 duplex stainless steel by the HVOF technique. Microstructural, tribological and corrosion behaviors of the coated and uncoated samples were investigated. ... -
Influence of The Phase Balance and Cooling Conditions on The Microstructure and Corrosion Behavior of Solution-treated 1.4462 Duplex Stainless Steel
(IOP Publishing, 2019)In this study, effect of cooling rate on the microstructure and corrosion behavior of the solutiontreated 1.4462 alloy was investigated. 1.4462 alloy was heat-treated at 1000 °C, 1120 °Cand 1200 °C for different duration ... -
Influence of the Post-Processing Operations on Surface Integrity of Metal Components Produced by Laser Powder Bed Fusion Additive Manufacturing: a Review
(Taylor & Francis Group, 2021)As industries are increasingly adopting the laser powder bed fusion (LPBF) additive manufacturing (AM) process, it is crucial to understand the process closely and to find ways to improve the final quality of the finished ... -
Infuence of Post‑processing on Additively Manufactured Lattice Structures
(Springer Science and Business Media Deutschland GmbH, 2022)The rapid evolution in additive manufacturing (AM) technology advocates a periodic assessment of the recent progress in the process and product developments. One such area is lattice structure (LS) fabrication with ... -
Investigation of Direct Metal Laser Sintering Downskin Parameters’ Sagging Effect on Microchannels
(Springer, 2021)Additive manufacturing technology is an innovative and advantageous production technology in producing microchannels, heat exchangers designed in complex geometries. Process parameters developed to provide production ... -
Investigation of Elemental Distribution in the Sheet Sections After Aluminum Continuous Sheet Casting, Cold Rolling and Heat Treatment Processes
(TMS Annual Meeting & Exhibition, 2018)Aluminum is used in millions of different products in many diverse industries from the aerospace industry to the food industry. Owing to its low density, high strength when alloyed, high elasticity, recyclability, high ... -
Investigation of High Energy Single Pulse Effect on Micro Arc Oxidation (MAO) Process on Aluminium
(Avestia Publishing, 2019)Micro Arc Oxidation (MAO) was applied by using high-energy anodic/cathodic pulses with various pulse durations. Anodic and cathodic pulse couples were kept at a constant voltage of 500 volts. Energy of each pulse increased ... -
Investigation of Inhibitory Effects of Chitosan on Pitting and Electrochemical Corrosion Behavior Caused by Sigma Phase in Duplex Stainless Steels (DSS)
(Pleiades journals, 2021)In this study, as a result of the heat treatment parameters applied to 2205 duplex stainless steel (DSS), the sigma phase formed in the microstructure and changes in the corrosion behavior of DSS due to this sigma phase ... -
Investigation of Manufacturability and Efficiency of Micro Channels with Different Geometries Produced by Direct Metal Laser Sintering
(Springer, 2021)Manufacturability without supports in design studies for additive manufacturing (AM) brings many advantages such as time, cost, part surface quality, and design freedom. It is thought that the geometries that can be ... -
Investigation of teachers' perceptions of organizational citizenship behavior and their evaluation in terms of educational administration
(Academic Journals, 2016)The aim of this study is to investigate teachers' perceptions of organizational citizenship behaviors and to evaluate them in terms of educational administration. Descriptive survey model was used in the research. The ... -
Investigation of the Effect of Heat Treatment Conditions on Hardness Properties of Maraging Steels Produced by Additive Manufacturing
(Kerim Çetinkaya, 2021)Additive Manufacturing (AM) technology produces parts in layers and offers design freedom (3D design), zero waste, reduced expensive tool material requirements, and improved mechanical properties. Maraging steels have ... -
Investigation of the Effect of Process Parameters and Geometry-Related Variations on Residual Stress for Aluminum 7050 Alloy Produced via Laser Powder Bed Fusion
(Springer, 2024)Laser powder bed fusion (L-PBF), one of the additive manufacturing methods, has gained an important place in several fields like aviation, space biomedical, etc., due to its advantages, such as producing complex shaped ... -
Investigation of the Effects of Different Heat Treatment Parameters on the Corrosion and Mechanical Properties of the AlSi10Mg Alloy Produced with Direct Metal Laser Sintering
(Wiley Online Library, 2019)In this study, AlSi10Mg samples produced by the direct metal laser sintering (DMLS) method were applied to heat treatment with different parameters (stress relief and T6). Heat‐treated and as‐built samples were subjected ... -
Investigation of the Effects of Different Retrogression and Re-Aging Parameters Applied to the 7075 Alloy on the Micro-Arc Oxidation Process
(World Scientific, 2021)In this paper, retrogression and re-aging (RRA) heat treatment was applied to 7075 aluminum alloy in T6 condition at di®erent times (30 and 90 min) and temperatures (180 C and 240 C). While RRA heat treatments increase ... -
Investigation of the Microstructure and Mechanical Characteristics of Lattice Structures Produced by Laser Powder Bed Fusion Method
(Springer, 2021)This study includes experimental research conducted to produce lattice structures and to examine their mechanical properties by taking advantage of the design freedom provided by additive manufacturing. Much of the existing ... -
Investigation of the Relationship Between Intergranular Corrosion and Retrogression and Reaging in the AA6063
(Wiley Online Library, 2019)AA6063 was heat treated with different retrogression temperatures and durations, and the effect of heat treatment conditions on the microstructure, hardness, electrical conductivity, intergranular corrosion (IGC) and ...
