Ara
Toplam kayıt 6, listelenen: 1-6
Investigation of the Surface Quality and Dimensional Accuracy of Polymer Patterns Produced by Selective Laser Sintering (SLS) Method for Investment Casting (IC)
(Taylor & Francis Group, 2020)
In this study, Polymer (Primecast® 101-EOS)patterns were produced with the EOS Formiga P110
system, and these patterns were compared with conventional wax patterns using their suitability
for the investment casting (IC) ...
Cooling Slope Casting of AA7075 Alloy Combined with Reheating and Thixoforging
(Elsevier, 2019)
Cooling slope casting has been applied to aluminium casting alloys for producing ingots with non-dendritic
microstructure. Semi-solid forming of the AA7075 was studied via cooling slope casting, reheating and thixoforging ...
The Application of the Direct Water Cooling Process on the Lost-Foam Casting Technique to Improve Microstructural and Mechanical Properties of A356 Alloy
(Springer, 2023)
Lost-foam casting (LFC) is one of the most straightforward
techniques to produce complex shaped parts with intricate
geometries. However, obtained microstructures are generally coarse in nature due to the slow solidification ...
Effect of Waste Titanium Chips Addition Into the Aluminum Alloys on Their Microstructure
(Gazi Üniversitesi, 2021)
In the present study, turning chips were preferred to add titanium into liquid aluminum. Although being easy to reach and cheap, the chips were thought to be effective in minor titanium addition with their large surface ...
Microstructure and Wear Characteristics of Hybrid Reinforced (ex-situ SiC–in-situ Mg2Si) Al Matrix Composites Produced by Vacuum Infiltration Method
(Elsevier, 2023)
Hybrid composite materials combine the advantages of two or more reinforcement materials and may contain
unique physical, mechanical and tribological properties that cannot be achieved with any other materials. In ...
Microstructural, Hardness, and Wear Properties of Mg2Si-reinforced Al Matrix in-situ Composites Produced by Low Superheat Casting
(Elsevier, 2024)
In this study, Mg2Si-reinforced A356 and A413 aluminum matrix composites were fabricated by low superheat
casting using AM50 magnesium alloy as a source for the in-situ formation of Mg2Si particles. AM50 was added to
each ...