Search
Now showing items 1-10 of 31
Effect of Secondary Phases on 475°C Embrittlement of 1.4462 and 1.4501 Duplex Stainless Steels at Short-term Heat Treatment Conditions
(IOP Publishing Ltd, 2019)
Duplex stainless steels (DSSs) are classified according to their chemical composition. Also, the
formation of the secondary phases can be defined as a main problem of the DSSs. In this study,
decomposition of chromium ...
Effect of RRA Heat Treatment on Corrosion and Mechanical Properties of AA7075
(Wiley, 2019)
In this study, a retrogression process (R) has been applied to AA7075 at
180, 240, and 370°C for 15, 30, 90, and 120 min. After the retrogression,
reaging treatment (RA) was reapplied with T6 conditions (120°C for 24 ...
Influence of The Phase Balance and Cooling Conditions on The Microstructure and Corrosion Behavior of Solution-treated 1.4462 Duplex Stainless Steel
(IOP Publishing, 2019)
In this study, effect of cooling rate on the microstructure and corrosion behavior of the solutiontreated
1.4462 alloy was investigated. 1.4462 alloy was heat-treated at 1000 °C, 1120 °Cand 1200 °C
for different duration ...
Investigation of the Surface Quality and Dimensional Accuracy of Polymer Patterns Produced by Selective Laser Sintering (SLS) Method for Investment Casting (IC)
(Taylor & Francis Group, 2020)
In this study, Polymer (Primecast® 101-EOS)patterns were produced with the EOS Formiga P110
system, and these patterns were compared with conventional wax patterns using their suitability
for the investment casting (IC) ...
Cooling Slope Casting of AA7075 Alloy Combined with Reheating and Thixoforging
(Elsevier, 2019)
Cooling slope casting has been applied to aluminium casting alloys for producing ingots with non-dendritic
microstructure. Semi-solid forming of the AA7075 was studied via cooling slope casting, reheating and thixoforging ...
Support Optimization for Overhanging Parts in Direct Metal Laser Sintering
(Elsevier, 2019)
The present work focuses mainly on the utilization of different support profiles for overhang
structures in EOS M290 Direct Metal Laser Sintering (DMLS) machine. Maraging steel (MS1)
parts with large overhangs were ...
Effects of Retrogression and Reaging Heat Treatment on the Microstructure, Exfoliation Corrosion, Electrical Conductivity, and Mechanical Properties of AA7050
(Wiley, 2019)
The effects of different retrogression times and temperatures on the
microstructure, electrical conductivity, exfoliation corrosion (EXCO), and
hardness of the 7050 aluminium alloy were compared with the T6 and ...
Effects of RRA Heat Treatment on the Exfoliation Corrosion (EXCO), Intergranular Corrosion (IGC), and Electrical Conductivity of AA7075 Alloy
(Wiley, 2019)
The corrosion sensitivity of the AA7075 alloy is related to the distribution, size,
continuous, or discontinuous network structure and electrochemical behavior of the
grain boundary precipitates. In addition, changes in ...
Investigation of the Effects of Different Heat Treatment Parameters on the Corrosion and Mechanical Properties of the AlSi10Mg Alloy Produced with Direct Metal Laser Sintering
(Wiley Online Library, 2019)
In this study, AlSi10Mg samples produced by the direct metal laser sintering
(DMLS) method were applied to heat treatment with different parameters (stress
relief and T6). Heat‐treated and as‐built samples were subjected ...
Investigation of the Relationship Between Intergranular Corrosion and Retrogression and Reaging in the AA6063
(Wiley Online Library, 2019)
AA6063 was heat treated with different retrogression temperatures and
durations, and the effect of heat treatment conditions on the microstructure,
hardness, electrical conductivity, intergranular corrosion (IGC) and ...
