Ara
Toplam kayıt 79, listelenen: 31-40
Effects of Copper Fillers on Mechanical and Electrical Properties of Selective Laser Sintered PA 12-Cu Composites
(Taylor & Francis Group, 2021)
Selective Laser Sintering (SLS) is a widely used additive manufacturing (AM) technique for
creating 3D geometries by adding materials in layers. Although neat polymer is mainly used in
powder forms for production, organic ...
Applicability of Modified T5 Temper for Aluminium Forged Parts
(ASM International, 2017)
In industrial applications, hot forging of aluminum alloy AA 6082 is carried out at 480 °C following a preheating process in an induction heater. The forged parts are then cooled down to room temperature, heated up again ...
Investigation of Manufacturability and Efficiency of Micro Channels with Different Geometries Produced by Direct Metal Laser Sintering
(Springer, 2021)
Manufacturability without supports in design studies for additive manufacturing (AM) brings many advantages such as time,
cost, part surface quality, and design freedom. It is thought that the geometries that can be ...
Investigation of the Effects of Different Retrogression and Re-Aging Parameters Applied to the 7075 Alloy on the Micro-Arc Oxidation Process
(World Scientific, 2021)
In this paper, retrogression and re-aging (RRA) heat treatment was applied to 7075 aluminum alloy in
T6 condition at di®erent times (30 and 90 min) and temperatures (180 C and 240 C). While RRA
heat treatments increase ...
Investigation of the Microstructure and Mechanical Characteristics of Lattice Structures Produced by Laser Powder Bed Fusion Method
(Springer, 2021)
This study includes experimental research conducted to produce lattice structures and to examine their mechanical properties
by taking advantage of the design freedom provided by additive manufacturing. Much of the existing ...
Selective Laser Sintering Manufacturing and Characterization of Lightweight PA 12 Polymer Composites with Different Hollow Microsphere Additives
(Springer, 2021)
The use of additives in polyamide polymeric SLS built frameworks further reinforces the goal of developing
lightweight components, which serves as the basis for the current investigation. In this paper, different
amounts ...
Corrosion of Additively Manufactured Metallic Components: A Review
(King Fahd University of Petroleum & Minerals, 2021)
The unique additive manufacturing (AM) attributes such as tool-less design, on-site fabrication, short production cycle, and
complex structures fabrication can make AM market penetration deeper. The sustained improvements ...
Comparison of the Effect of Different Topological Designs and Process Parameters on Mechanical Strength in Gears
(Springer, 2021)
Gear wheels, the first examples of use in the Mesopotamian period, continue to develop with different forms and features
together with advanced technologies. Within the scope of this study, the DMLS (direct metal laser ...
Investigation of Inhibitory Effects of Chitosan on Pitting and Electrochemical Corrosion Behavior Caused by Sigma Phase in Duplex Stainless Steels (DSS)
(Pleiades journals, 2021)
In this study, as a result of the heat treatment parameters applied to 2205 duplex stainless steel
(DSS), the sigma phase formed in the microstructure and changes in the corrosion behavior of DSS due to
this sigma phase ...
Effect of Building Orientations and Heat Treatments on Alsi10mg Alloy Fabricated by Selective Laser Melting: Microstructure Evolution, Mechanical Properties, Fracture Mechanism and Corrosion Behavior
(Emerald Publishing Limited, 2022)
Purpose – The present paper aims to systematically investigate the influence of building orientations (0°, 15°, 30°, 45°, 60°, 75°) and heat
treatment processes on the macro-/micro-structural, mechanical and electrochemical ...