• The Combined Effect of Energy Density and Hollow Microspheres Additive on Structural and Wear Properties of Polyamide 11 Composites Produced Via Selective Laser Sintering 

  Cingöz, Umut Can; Kısasöz, Burçin Özbay; Kısasöz, Alptekin (Elsevier, 2025)

  This study investigated the production and properties of polyamide 11 matrix hollow ceramic microsphere reinforced composites. The composites were produced at 10 wt% and 20 wt% reinforcement ratios by selective laser ...

• A Novel Form “Bubble Microstructure” in LPBF and Investigation of Its Mechanical Strength on TPMS‑Gyroid 

  Çalışkan, Cemal İrfan; Özer, Gökhan; Khan, Hamaid Mahmood (Springer, 2024)

  In our previous research within the scope of process parameters change, the innovative 30 μm synchronous scanning strategy (SSS) in the Laser Powder Bed Fusion production system and the effect of this scanning strategy ...

• Microstructure Evolution of AlSi10Mg Alloy in RAP Process 

  Tütük, İbrahim; Acar, Serhat; Özer, Gökhan; Güler, Kerem Altuğ (De Gruyter, 2024)

  With its computer-aided layer-by-layer production approach, additive manufacturing (AM) and powder bed laser fusion (PBLF) paved the way to produce metallic parts more precisely than any other manufacturing technique. However, ...

• Role of Mechanically Alloyed Materials in Energy Storage and Automotive Applications 

  Khan, Hamaid Mahmood (Elsevier, 2024)

  Due to global apprehensions surrounding environmental sustainability and the push for cleaner transportation, there has been a noticeable upsurge in the demand for effective energy storage systems and advanced materials ...

• Characterization of Al/B4C–Y2O3 Hybrid Composites Produced by Vacuum Hot Pressing Combined with Al2O3–Y2O3 Interaction 

  Bayrak, Yahya; Kısasöz, Burçin Özbay; Tarakçı, Gürkan; Kısasöz, Alptekin (Elsevier, 2024)

  In this study, the Al/B4C/Y2O3 hybrid composites were produced by Al2O3 and Y2O3 interaction via hot pressing. Moreover, the influence of Y2O3 on the properties of Al/B4C 10 wt% was investigated. The hot pressing was ...

• Influence of Solution Treatment Process on the Properties of Duplex Stainless Steels: A Comparative Study on Microstructure and Corrosion Properties of UNS S32205 and UNS S32760 

  Tütük, İbrahim; Ural, Mehmet Moğoltay; Özer, Gökhan; Kısasöz, Alptekin (Springer, 2024)

  The study investigated the effect of the solution treatment process on the corrosion behavior and microstructure of the duplex stainless steel. It was also aimed to reveal this effect comparatively depending on the ...

• Investigation of the Effect of Process Parameters and Geometry-Related Variations on Residual Stress for Aluminum 7050 Alloy Produced via Laser Powder Bed Fusion 

  Coşkun, Mert; Sağbaş, Binnur; Akyıldız, Yağız; Odabaş, Ömür Can (Springer, 2024)

  Laser powder bed fusion (L-PBF), one of the additive manufacturing methods, has gained an important place in several fields like aviation, space biomedical, etc., due to its advantages, such as producing complex shaped ...

• Influence of High-Velocity Oxy-fuel Sprayed Cr3C2-NiCr Coating on Corrosion and Wear Properties of AISI 2205 

  Işık, Rasim Göker; Kısasöz, Burçin Özbay; Tarakçı, Gürkan; Karabeyoğlu, Sencer Süreyya; Uğuz, Tolun; Kısasöz, Alptekin (Springer, 2024)

  In this study, Cr3C2/10%NiCr layer was deposited on the AISI 2205 duplex stainless steel by the HVOF technique. Microstructural, tribological and corrosion behaviors of the coated and uncoated samples were investigated. ...

• Electrochemical Corrosion Behaviour of UNS S32205 Duplex Stainless Steel Dependent on Sigma Phase Precipitation 

  Kısasöz, Burçin Özbay; Tütük, İbrahim; Acar, Serhat; Kısasöz, Alptekin (De Gruyter, 2024)

  In this study, the microstructure and electrochemical corrosion behavior of the UNS S32205 alloy were investigated. Firstly, the phase diagram of the studied samples was determined by Thermo-Calc 2022 software, and the ...

• Development of an Alternative Heat Treatment to the Traditional T6 Heat Treatment of AlSi10Mg Alloy Produced by Additive Manufacturing 

  Tütük, İbrahim; Ural, Mehmet Moğoltay; Yılmaz, Mustafa Safa; Özer, Gökhan (Springer, 2024)

  In this study, alternative solution heat treatments, applied at lower temperatures and shorter times, were applied to AlSI10Mg samples produced with the powder bed laser fusion technique. Thermocalc software was used to ...

• Microstructural, Hardness, and Wear Properties of Mg2Si-reinforced Al Matrix in-situ Composites Produced by Low Superheat Casting 

  Özkan, Tolga; Tutuk, İbrahim; Acar, Serhat; Gecu, Rıdvan; Güler, Kerem Altuğ (Elsevier, 2024)

  In this study, Mg2Si-reinforced A356 and A413 aluminum matrix composites were fabricated by low superheat casting using AM50 magnesium alloy as a source for the in-situ formation of Mg2Si particles. AM50 was added to each ...

• Investigation of Wear Behavior of PA 12 Matrix Ceramic Reinforced Composites Produced by Selective Laser Sintering Method 

  Kısasöz, Burçin Özbay; Tütük, İbrahim; Koç, Ebubekir; Karabeyoğlu, Sencer Süreyya; Kısasöz, Alptekin (Gazi University, 2024)

  In this study, ceramic-reinforced PA 12 matrix composites were fabricated by using Selective Laser Sintering (SLS) additive manufacturing method with different energy density values. Additionally, dry sliding wear tests ...

• Nanocomposites and Nanohybrids in Additive Manufacturing 

  Ertürk, A.T.; Özer, G. (De Gruyter, 2023)

  Additive manufacturing (AM) has undergone significant technological development since its emergence in the 1970s. This development is expected to continue and take an important place in the manufacturing sector. Developing ...

• Heat Treatment of Additive Manufactured Metals 

  Yılmaz, Mustafa Safa; Özer, Gökhan (Springer, 2023)

  Additive manufacturing systems, which have strict control processes before and after manufacturing, are used in many industries. The quality of the machine’s equipment and raw materials used directly affect the production ...

• Corrosion Behaviour of Additive Manufactured Metals 

  Özer, Gökhan; Yılmaz, Mustafa Safa (Springer, 2023)

  Additive manufacturing is the production process in which a 3D CAD model is combined into layers, and the material is turned into a physical part. Additive manufacturing is an important technology that is very popular and ...

• The Comparison of Pullout Strengths of Various Producing Methods for Internal Screw Threads of Additive Manufactured Metal Parts 

  Yarar, Eser; Ertürk, Alpay Tamer; Özer, Gökhan; Bulduk, Mustafa Enes (Springer, 2023)

  Thread fastening is the primary method of joining components to construct a final product. Since thread coupling exists in many different industrial applications, this study aims to identify the proper manufacturing steps ...

• Thermoplastic Polymers and Polymer Composites Used in Selective Laser Sintering (SLS) Method 

  Kısasöz, Burçin Özbay; Koç, Ebubekir (Springer, 2023)

  Selective laser sintering (SLS) is a powder bed fusion (PBF) additive manufacturing (AM) technique that uses high-energy beams (laser beams, electron beams, or an infrared panel heater) to coalescence (or melt) ...

• Challenges in Additive Manufacturing Technology: Post Processing, Design and Material’s Selection 

  Khan, Hamaid Mahmood; Waqar, Saad (Springer Nature, 2023)

  It is important to bear in mind that additive manufacturing (AM) did not emerge in isolation but rather built upon earlier technologies. The rapid adoption of 3D printing technology across industries serves as a testament ...

• Post-Processing in Additive Manufacturing Requirements, Theories, and Methods 

  Khan, Hamaid Mahmood; Özer, Gökhan; Yılmaz, Mustafa Safa (CRC Press Taylor & Francis Group, 2023)

  3D printing has always been seen as a promising technology for creating small, lowquality prototypes. As it is getting faster and more dependable, its applications are becoming more diversified. 3D printing involves adding ...

• An Overview of the Quality Characteristics Challenges in Additive Manufacturing 

  Kısasöz, B. Özbay; Kısasöz, A. (CRC Press Taylor & Francis Group, 2023)

  Recently, additive manufacturing (AM), commonly known as three-dimensional (3D) printing, has become an environmentally friendly technology that provides energy savings, less material consumption and efficient production. ...

View more