Ara
Toplam kayıt 290, listelenen: 1-10
Effect of HIP Process and Subsequent Heat Treatment on Microstructure and Mechanical Properties of Direct Metal Laser Sintered AlSi10Mg Alloy
(Emerald, 2020)
Purpose – The purpose of this paper is to evaluate the effect of post process combinations, e.g. hot isostatic pressing (HIP) only, HIP 1 T6 heat
treatments, and T6 only, with different aging time, on surface properties, ...
Effect of Intrinsic Polymer Properties on the Photo Sensitive Organic Field-effect Transistors (Photo-OFETs)
(Elsevier, 2016)
In this work, we have demonstrated how the intrinsic properties of a conjugated polymer can
influence the electro-optical characteristics of photo sensitive organic field - effect transistors
(Photo-OFETs). Photo-OFETs ...
Effect of Secondary Phases on 475°C Embrittlement of 1.4462 and 1.4501 Duplex Stainless Steels at Short-term Heat Treatment Conditions
(IOP Publishing Ltd, 2019)
Duplex stainless steels (DSSs) are classified according to their chemical composition. Also, the
formation of the secondary phases can be defined as a main problem of the DSSs. In this study,
decomposition of chromium ...
Effect of RRA Heat Treatment on Corrosion and Mechanical Properties of AA7075
(Wiley, 2019)
In this study, a retrogression process (R) has been applied to AA7075 at
180, 240, and 370°C for 15, 30, 90, and 120 min. After the retrogression,
reaging treatment (RA) was reapplied with T6 conditions (120°C for 24 ...
Pseudo‑Relevance Feedback Based Query Expansion Using Boosting Algorithm
(Springer, 2021)
Retrieving relevant documents from a large set using the original query is a formidable
challenge. A generic approach to improve the retrieval process is realized using pseudo-relevance
feedback techniques. This technique ...
Performance Improvement in Photosensitive Organic Field Effect Transistor by Using Multi-Layer Structure
(Elsevier, 2019)
In this study, a new approach was introduced for Photo-OFETs as a multi-layer structure. Poly(3-hexylthiophene-
2,5-diyl) regioregular (P3HT) and Copper(II) phthalocyanine (CuPc) thin films were used as two different ...
Processing and Characterization of Hollow Glass-Filled Polyamide 12 Composites by Selective Laser Sintering Method
(Taylor & Francis Ltd, 2020)
Selective Laser Sintering (SLS) is an accepted and improving technique for additive manufacturing
in many different areas, from the applications of aerospace to automotive, consumer
products to dental and medical materials. ...
Pd Thin Films on Flexible Substrate for Hydrogen Sensor
(Elsevier, 2016)
In this work, palladium (Pd) thin films were prepared via RF sputtering method with
various thicknesses (6 nm, 20 nm and 60 nm) on both a flexible substrate and a hard substrate.
Hydrogen (H2) sensing properties of Pd ...
Performance Enhancement of Inverted Type Organic Solar Cells by Using Eu Doped TiO2 Thin Film
(Elsevier, 2017)
In the present work, europium (Eu) has been used as a dopant element in titanium dioxide
(TiO2) crystal structure to enhance the photovoltaic performance of the inverted type organic
solar cells fabricated with TiO2 thin ...
Influence of The Phase Balance and Cooling Conditions on The Microstructure and Corrosion Behavior of Solution-treated 1.4462 Duplex Stainless Steel
(IOP Publishing, 2019)
In this study, effect of cooling rate on the microstructure and corrosion behavior of the solutiontreated
1.4462 alloy was investigated. 1.4462 alloy was heat-treated at 1000 °C, 1120 °Cand 1200 °C
for different duration ...