Browsing Merkezler / Centers by Title
Now showing items 13-32 of 133
-
Challenges in Additive Manufacturing Technology: Post Processing, Design and Material’s Selection
(Springer Nature, 2023)It is important to bear in mind that additive manufacturing (AM) did not emerge in isolation but rather built upon earlier technologies. The rapid adoption of 3D printing technology across industries serves as a testament ... -
Characterization of Al/B4C–Y2O3 Hybrid Composites Produced by Vacuum Hot Pressing Combined with Al2O3–Y2O3 Interaction
(Elsevier, 2024)In this study, the Al/B4C/Y2O3 hybrid composites were produced by Al2O3 and Y2O3 interaction via hot pressing. Moreover, the influence of Y2O3 on the properties of Al/B4C 10 wt% was investigated. The hot pressing was ... -
Classification of Main Faults in the Production Process of Extruded Aluminium Profiles
(İstanbul Gelişim Üniversitesi, 2015)Aluminium use has been rising steadily in recent decades. Several different industries are adapting it since its light weight, doable structure and robustness. Aluminium manufacturing runs in three ways; namely: (1) ... -
The Comparison of Pullout Strengths of Various Producing Methods for Internal Screw Threads of Additive Manufactured Metal Parts
(Springer, 2023)Thread fastening is the primary method of joining components to construct a final product. Since thread coupling exists in many different industrial applications, this study aims to identify the proper manufacturing steps ... -
Comparison of the Effect of Different Topological Designs and Process Parameters on Mechanical Strength in Gears
(Springer, 2021)Gear wheels, the first examples of use in the Mesopotamian period, continue to develop with different forms and features together with advanced technologies. Within the scope of this study, the DMLS (direct metal laser ... -
Cooling Slope Casting of AA7075 Alloy Combined with Reheating and Thixoforging
(Elsevier, 2019)Cooling slope casting has been applied to aluminium casting alloys for producing ingots with non-dendritic microstructure. Semi-solid forming of the AA7075 was studied via cooling slope casting, reheating and thixoforging ... -
Corrigendum to “Building a text collection for Urdu information retrieval”
(Wiley, 2021)Building a text collection for Urdu information retrieval https://doi.org/10.4218/etrij.2019-0458 ETRI Journal, Volume 43, Issue 5, October 2021, pp. 856–868. The authors regret that the original authorship list did ... -
Corrosion Behaviour of Additive Manufactured Metals
(Springer, 2023)Additive manufacturing is the production process in which a 3D CAD model is combined into layers, and the material is turned into a physical part. Additive manufacturing is an important technology that is very popular and ... -
Corrosion of Additively Manufactured Metallic Components: A Review
(King Fahd University of Petroleum & Minerals, 2021)The unique additive manufacturing (AM) attributes such as tool-less design, on-site fabrication, short production cycle, and complex structures fabrication can make AM market penetration deeper. The sustained improvements ... -
Cubic-Shaped Corylus Colurna Extract Coated Cu2O Nanoparticles-Based Smartphone Biosensor for the Detection of Ascorbic Acid in Real Food Samples
(Elsevier, 2023)Ascorbic acid (AA) is a highly water-soluble organic chemical compound and plays a significant role in human metabolism. For the purpose of food quality monitoring, this study focuses on the development of a smartphoneintegrated ... -
A Determination of the Corrosion and Microstructure Properties of AlSi10Mg Material Produced by Different Direct Metal Laser Sintering (DMLS) Process Parameters
(Bitlis Eren Üniversitesi, 2022)Additive Manufacturing (AM) has been developing with increasing interest recently. The development of this technology will accelerate with the increase in material, process, and product quality. It is therefore essential ... -
Development of an Alternative Heat Treatment to the Traditional T6 Heat Treatment of AlSi10Mg Alloy Produced by Additive Manufacturing
(Springer, 2024)In this study, alternative solution heat treatments, applied at lower temperatures and shorter times, were applied to AlSI10Mg samples produced with the powder bed laser fusion technique. Thermocalc software was used to ... -
Double Stud Cargo Fitting Research, Alternative Cargo Clip Design and Analysis
(Embry-Riddle Aeronautical University, 2019)In air transportation, fixing the cargo inside the aircraft is important in terms of both flight safety and operational process. Positioning and fixing of the cargo to the aircraft within a short period of time without any ... -
Dönüşümcü ve İşlemci Liderlik Stilleri: Kavramsal Çerçevesi ve Eğitim Örgütleri Açısından Etkileri
(FSM Vakıf Üniversitesi, 2015)Örgütlerin iç ve dış çevrelerinde yaşanan hızlı gelişmeler, daha etkin ve etkili liderlik tarzlarının organizasyonlarda uygulanmasını zorunlu kılmıştır. Dönüşümcü ve işlemci liderlik stillerinin, örgütlerin yapılarına, ... -
Dry Sliding Wear Behavior of 316 L Stainless Steel Produced by Laser Powder Bed Fusion: A Comparative Study on Test Temperature
(Elsevier, 2023)Laser powder bed fusion (LPBF) is becoming more popular and widely acceptable class of the additive manufacturing processes for metallic objects. The impact of test temperatures, sliding speed, and loading conditions on ... -
Dry Sliding Wear Behavior of Energy Density Dependent PA 12/Cu Composites Produced by Selective Laser Sintering
(De Gruyter, 2023)The selective laser sintering process is widely used to fabricate polyamide matrix composites. Although various reinforcements are used to produce polyamide matrix composites, metallic-based reinforcements are used to ... -
Dynamic / Thermochemical Method: A Novel Approach in The Synthesis of B4C Powder
(Elsevier, 2021)The synthesis of high quality B4C powders with high purity, uniaxial shape and homogeneous size distribution, has been hard to obtain. Current production methods take place at temperatures above 1800 C, yielding high ... -
Efciency Comparison of Conformal Cooling Channels Produced by Additive and Subtractive Manufacturing in Automotive İndustry Plastic İnjection Moulds: A Hybrid Application
(Springer, 2023)The stages of this study, in which conformal cooling channels (CCCs) integrated mould core produced by LPBF (laser powder bed fusion) and CCC integrated mould core produced by SM (subtractive manufacturing), are used in a ... -
Effect of Aging and Finish Machining on the Surface Integrity of Selective Laser Melted Maraging Steel
(Emerald Publishing Limited, 2021)Purpose – The present study aims to investigate the effect of finish machining and aging processes on the surface integrity of the selective laser melted (SLM) maraging steel samples and compared them with those obtained ... -
Effect of Building Orientations and Heat Treatments on Alsi10mg Alloy Fabricated by Selective Laser Melting: Microstructure Evolution, Mechanical Properties, Fracture Mechanism and Corrosion Behavior
(Emerald Publishing Limited, 2022)Purpose – The present paper aims to systematically investigate the influence of building orientations (0°, 15°, 30°, 45°, 60°, 75°) and heat treatment processes on the macro-/micro-structural, mechanical and electrochemical ...
