Ara
Toplam kayıt 96, listelenen: 51-60
A Determination of the Corrosion and Microstructure Properties of AlSi10Mg Material Produced by Different Direct Metal Laser Sintering (DMLS) Process Parameters
(Bitlis Eren Üniversitesi, 2022)
Additive Manufacturing (AM) has been developing with increasing interest recently.
The development of this technology will accelerate with the increase in material,
process, and product quality. It is therefore essential ...
The Application of the Direct Water Cooling Process on the Lost-Foam Casting Technique to Improve Microstructural and Mechanical Properties of A356 Alloy
(Springer, 2023)
Lost-foam casting (LFC) is one of the most straightforward
techniques to produce complex shaped parts with intricate
geometries. However, obtained microstructures are generally coarse in nature due to the slow solidification ...
Post‑Process Drilling of AlSi10Mg Parts by Laser Powder Bed Fusion
(Springer, 2023)
In the last decade, additive manufacturing (AM) technologies have had an extraordinary research interest in each of the
relevant topics: essential manufacturing method development, raw materials, optimization of process ...
Dry Sliding Wear Behavior of Energy Density Dependent PA 12/Cu Composites Produced by Selective Laser Sintering
(De Gruyter, 2023)
The selective laser sintering process is widely
used to fabricate polyamide matrix composites. Although
various reinforcements are used to produce polyamide
matrix composites, metallic-based reinforcements are used
to ...
Precipitation of Carbides in A Nickel-Based Cast Heat-Resistant Alloy During Thermal Exposure: Evolution of Microstructure, Hardness and Corrosion Properties
(De Gruyter, 2023)
Ni-based G-NiCr28W alloy, which is widely preferred
in high-temperature applications, has an austenite matrix as
well as carbides dispersed in the structure. The morphology of
the carbides in the structure varies depending ...
Cubic-Shaped Corylus Colurna Extract Coated Cu2O Nanoparticles-Based Smartphone Biosensor for the Detection of Ascorbic Acid in Real Food Samples
(Elsevier, 2023)
Ascorbic acid (AA) is a highly water-soluble organic chemical compound and plays a significant role in human
metabolism. For the purpose of food quality monitoring, this study focuses on the development of a smartphoneintegrated ...
Seçici Lazer Sinterlemede Poliamid 12’ye Dendritik Bakır Tozu İlavesinin Etkisi
(Gazi Üniversitesi, 2021)
Günümüzde polimer malzemeler ev eşyalarından mühendislik uygulamalarına kadar geniş bir kullanım
alanına sahiptir. Bu nedenle özelliklerinin geliştirilmesi önemlidir. Katkı maddeleri ilavesi, polimer
malzemelerin ...
Effect of Waste Titanium Chips Addition Into the Aluminum Alloys on Their Microstructure
(Gazi Üniversitesi, 2021)
In the present study, turning chips were preferred to add titanium into liquid aluminum. Although being easy to reach and cheap, the chips were thought to be effective in minor titanium addition with their large surface ...
Efficiency Research of Conformal Channel Geometries Produced by Additive Manufacturing in Plastic Injection Mold Cores (Inserts) Used in Automotive Industry
(Mary Ann Liebert, Inc., 2022)
In the production of geometries that traditional methods cannot produce, it is seen that additive manufacturing
(AM) technology, which has come to the fore, has been used extensively in conformal cooling channel ...
Weibull Distribution of Selective Laser Melted AlSi10Mg Parts for Compression Testing
(Yıldız Teknik Üniversitesi, 2021)
Selective laser melting (SLM) is an additive manufacturing process to fabricate three-dimensional structures by fusing powder particles using a computer-guided laser source. The SLM
process can produce lightweight bespoke ...