Search
Now showing items 1-10 of 15
Double Stud Cargo Fitting Research, Alternative Cargo Clip Design and Analysis
(Embry-Riddle Aeronautical University, 2019)
In air transportation, fixing the cargo inside the aircraft is important in terms of both flight safety and operational process. Positioning and fixing of the cargo to the aircraft within a short period of time without any ...
Effect of Secondary Phases on 475°C Embrittlement of 1.4462 and 1.4501 Duplex Stainless Steels at Short-term Heat Treatment Conditions
(IOP Publishing Ltd, 2019)
Duplex stainless steels (DSSs) are classified according to their chemical composition. Also, the
formation of the secondary phases can be defined as a main problem of the DSSs. In this study,
decomposition of chromium ...
Effect of RRA Heat Treatment on Corrosion and Mechanical Properties of AA7075
(Wiley, 2019)
In this study, a retrogression process (R) has been applied to AA7075 at
180, 240, and 370°C for 15, 30, 90, and 120 min. After the retrogression,
reaging treatment (RA) was reapplied with T6 conditions (120°C for 24 ...
Influence of The Phase Balance and Cooling Conditions on The Microstructure and Corrosion Behavior of Solution-treated 1.4462 Duplex Stainless Steel
(IOP Publishing, 2019)
In this study, effect of cooling rate on the microstructure and corrosion behavior of the solutiontreated
1.4462 alloy was investigated. 1.4462 alloy was heat-treated at 1000 °C, 1120 °Cand 1200 °C
for different duration ...
The Effect of Retrogression and Re-Aging Treatment on Mechanical and Tribological Features of AA7075 Aluminium Alloy
(Wiley-VCH GmbH, 2019)
In this study, T651-applied AA7075 alloy was subjected to retrogression and reaging (RRA) process. Various retrogression temperatures (180 °C, 280 °C, 370 °
C) and times (15 min, 30 min, 90 min) were used to determine the ...
Cooling Slope Casting of AA7075 Alloy Combined with Reheating and Thixoforging
(Elsevier, 2019)
Cooling slope casting has been applied to aluminium casting alloys for producing ingots with non-dendritic
microstructure. Semi-solid forming of the AA7075 was studied via cooling slope casting, reheating and thixoforging ...
Support Optimization for Overhanging Parts in Direct Metal Laser Sintering
(Elsevier, 2019)
The present work focuses mainly on the utilization of different support profiles for overhang
structures in EOS M290 Direct Metal Laser Sintering (DMLS) machine. Maraging steel (MS1)
parts with large overhangs were ...
Effects of Retrogression and Reaging Heat Treatment on the Microstructure, Exfoliation Corrosion, Electrical Conductivity, and Mechanical Properties of AA7050
(Wiley, 2019)
The effects of different retrogression times and temperatures on the
microstructure, electrical conductivity, exfoliation corrosion (EXCO), and
hardness of the 7050 aluminium alloy were compared with the T6 and ...
Effects of RRA Heat Treatment on the Exfoliation Corrosion (EXCO), Intergranular Corrosion (IGC), and Electrical Conductivity of AA7075 Alloy
(Wiley, 2019)
The corrosion sensitivity of the AA7075 alloy is related to the distribution, size,
continuous, or discontinuous network structure and electrochemical behavior of the
grain boundary precipitates. In addition, changes in ...
Investigation of the Effects of Different Heat Treatment Parameters on the Corrosion and Mechanical Properties of the AlSi10Mg Alloy Produced with Direct Metal Laser Sintering
(Wiley Online Library, 2019)
In this study, AlSi10Mg samples produced by the direct metal laser sintering
(DMLS) method were applied to heat treatment with different parameters (stress
relief and T6). Heat‐treated and as‐built samples were subjected ...
