Ara
Toplam kayıt 7, listelenen: 1-7
Effect of Heat Treatments on the Microstructure and Wear Behaviour of A Selective Laser Melted Maraging Steel
(SAGE, 2022)
This study applied classical and intercritical heat treatments to maraging steel (MS1) samples produced with standard additive manufacturing (AM) production parameters. The effects of heat treatment parameters on the ...
Dry Sliding Wear Behavior of Energy Density Dependent PA 12/Cu Composites Produced by Selective Laser Sintering
(De Gruyter, 2023)
The selective laser sintering process is widely
used to fabricate polyamide matrix composites. Although
various reinforcements are used to produce polyamide
matrix composites, metallic-based reinforcements are used
to ...
Precipitation of Carbides in A Nickel-Based Cast Heat-Resistant Alloy During Thermal Exposure: Evolution of Microstructure, Hardness and Corrosion Properties
(De Gruyter, 2023)
Ni-based G-NiCr28W alloy, which is widely preferred
in high-temperature applications, has an austenite matrix as
well as carbides dispersed in the structure. The morphology of
the carbides in the structure varies depending ...
Effect of Waste Titanium Chips Addition Into the Aluminum Alloys on Their Microstructure
(Gazi Üniversitesi, 2021)
In the present study, turning chips were preferred to add titanium into liquid aluminum. Although being easy to reach and cheap, the chips were thought to be effective in minor titanium addition with their large surface ...
Investigation of Wear Behavior of PA 12 Matrix Ceramic Reinforced Composites Produced by Selective Laser Sintering Method
(Gazi University, 2024)
In this study, ceramic-reinforced PA 12 matrix composites were fabricated by using Selective Laser
Sintering (SLS) additive manufacturing method with different energy density values. Additionally, dry
sliding wear tests ...
Electrochemical Corrosion Behaviour of UNS S32205 Duplex Stainless Steel Dependent on Sigma Phase Precipitation
(De Gruyter, 2024)
In this study, the microstructure and electrochemical corrosion behavior of the UNS S32205 alloy were investigated. Firstly, the phase diagram of the studied samples was determined by Thermo-Calc 2022 software, and the ...
Influence of High-Velocity Oxy-fuel Sprayed Cr3C2-NiCr Coating on Corrosion and Wear Properties of AISI 2205
(Springer, 2024)
In this study, Cr3C2/10%NiCr layer was deposited on the AISI 2205 duplex stainless steel by the HVOF
technique. Microstructural, tribological and corrosion behaviors of the coated and uncoated samples were
investigated. ...