• The Combined Effect of Energy Density and Hollow Microspheres Additive on Structural and Wear Properties of Polyamide 11 Composites Produced Via Selective Laser Sintering 

  Cingöz, Umut Can; Kısasöz, Burçin Özbay; Kısasöz, Alptekin (Elsevier, 2025)

  This study investigated the production and properties of polyamide 11 matrix hollow ceramic microsphere reinforced composites. The composites were produced at 10 wt% and 20 wt% reinforcement ratios by selective laser ...

• A Novel Form “Bubble Microstructure” in LPBF and Investigation of Its Mechanical Strength on TPMS‑Gyroid 

  Çalışkan, Cemal İrfan; Özer, Gökhan; Khan, Hamaid Mahmood (Springer, 2024)

  In our previous research within the scope of process parameters change, the innovative 30 μm synchronous scanning strategy (SSS) in the Laser Powder Bed Fusion production system and the effect of this scanning strategy ...

• Microstructure Evolution of AlSi10Mg Alloy in RAP Process 

  Tütük, İbrahim; Acar, Serhat; Özer, Gökhan; Güler, Kerem Altuğ (De Gruyter, 2024)

  With its computer-aided layer-by-layer production approach, additive manufacturing (AM) and powder bed laser fusion (PBLF) paved the way to produce metallic parts more precisely than any other manufacturing technique. However, ...

• Determining the Structural Performance of the Concrete and Masonry Shafts in a Historic Waterway 

  Güneş, Barış; Coşgun, Turgay; Aysal, Namık; Samadi, Kamran; Bilir, Turhan; Şimşek, Onur; Hatipoğlu, Karsu; Sayın, Barış (Elsevier, 2024)

  Determining the seismic performance level of shaft structures is crucial due to their vital role in ensuring a water supply. Since these are underground structures, the loads they encounter and the structural modeling ...

• Role of Mechanically Alloyed Materials in Energy Storage and Automotive Applications 

  Khan, Hamaid Mahmood (Elsevier, 2024)

  Due to global apprehensions surrounding environmental sustainability and the push for cleaner transportation, there has been a noticeable upsurge in the demand for effective energy storage systems and advanced materials ...

• Detrital Zircon and Rutile U–Pb Dating of Garnet-mica schist in the Istranca (Strandja) Massif (NW Türkiye): Mineral chemistry and metamorphic conditions 

  Kaygısız, Ersin; Aysal, Namık; Yağcıoğlu, Kıymet Deniz (Elsevier, 2024)

  The Strandja Massif is one of the important metamorphic Massifs of Türkiye. The Strandja Massif consists of metasedimentary, and metamagmatic rocks such as migmatite, ortho- and paragneiss, metagranite, garnet-micaschis ...

• Yeni İstanbul Uluslararası Öğrenciler İçin Türkçe Ders Kitaplarının İstanbul Kültürünü Yansıtmasına Genel Bir Bakış 

  Alantepe, İsmail (Mustafa Durmuş, 2024)

  Kültür, dil öğretiminde ihmal edilmemesi gereken bir husustur. Kültürel bağlama oturtulmayan dil eğitiminin temeli sağlam olmaz ve öğrenilenlerin kapsayıcılığı ve derinliği eksik kalır. Bu sebeple ders kitaplarında kültürü ...

• Characterization of Al/B4C–Y2O3 Hybrid Composites Produced by Vacuum Hot Pressing Combined with Al2O3–Y2O3 Interaction 

  Bayrak, Yahya; Kısasöz, Burçin Özbay; Tarakçı, Gürkan; Kısasöz, Alptekin (Elsevier, 2024)

  In this study, the Al/B4C/Y2O3 hybrid composites were produced by Al2O3 and Y2O3 interaction via hot pressing. Moreover, the influence of Y2O3 on the properties of Al/B4C 10 wt% was investigated. The hot pressing was ...

• Influence of Solution Treatment Process on the Properties of Duplex Stainless Steels: A Comparative Study on Microstructure and Corrosion Properties of UNS S32205 and UNS S32760 

  Tütük, İbrahim; Ural, Mehmet Moğoltay; Özer, Gökhan; Kısasöz, Alptekin (Springer, 2024)

  The study investigated the effect of the solution treatment process on the corrosion behavior and microstructure of the duplex stainless steel. It was also aimed to reveal this effect comparatively depending on the ...

• Sonosynthesis and Artificial Intelligence-enhanced Characterization of PEGylated Camellia Sinensis-Encapsulated Zinc Oxide Nanoparticles: Cytotoxicity Capacity Against Cervical Cancer and Fibroblast Cells 

  Asmaz, Anıl; Üstün, Fulya Alkan; Kalaycılar, İsmail Bergutay; Küçükdeniz, Tarık; Özbaş, Fatih; Karakuş, Selcan (Taylor & Francis, 2024)

  In this study, we investigated the cytotoxicity of zincoxide nanoparticles (ZnO NPs) encapsulated in PEGylated Camellia sinensis extract (CL) against L929 fibroblasts and HeLa cervical cancer cells. Characterization ...

• Investigation of the Effect of Process Parameters and Geometry-Related Variations on Residual Stress for Aluminum 7050 Alloy Produced via Laser Powder Bed Fusion 

  Coşkun, Mert; Sağbaş, Binnur; Akyıldız, Yağız; Odabaş, Ömür Can (Springer, 2024)

  Laser powder bed fusion (L-PBF), one of the additive manufacturing methods, has gained an important place in several fields like aviation, space biomedical, etc., due to its advantages, such as producing complex shaped ...

• Influence of High-Velocity Oxy-fuel Sprayed Cr3C2-NiCr Coating on Corrosion and Wear Properties of AISI 2205 

  Işık, Rasim Göker; Kısasöz, Burçin Özbay; Tarakçı, Gürkan; Karabeyoğlu, Sencer Süreyya; Uğuz, Tolun; Kısasöz, Alptekin (Springer, 2024)

  In this study, Cr3C2/10%NiCr layer was deposited on the AISI 2205 duplex stainless steel by the HVOF technique. Microstructural, tribological and corrosion behaviors of the coated and uncoated samples were investigated. ...

• Electrochemical Corrosion Behaviour of UNS S32205 Duplex Stainless Steel Dependent on Sigma Phase Precipitation 

  Kısasöz, Burçin Özbay; Tütük, İbrahim; Acar, Serhat; Kısasöz, Alptekin (De Gruyter, 2024)

  In this study, the microstructure and electrochemical corrosion behavior of the UNS S32205 alloy were investigated. Firstly, the phase diagram of the studied samples was determined by Thermo-Calc 2022 software, and the ...

• Development of an Alternative Heat Treatment to the Traditional T6 Heat Treatment of AlSi10Mg Alloy Produced by Additive Manufacturing 

  Tütük, İbrahim; Ural, Mehmet Moğoltay; Yılmaz, Mustafa Safa; Özer, Gökhan (Springer, 2024)

  In this study, alternative solution heat treatments, applied at lower temperatures and shorter times, were applied to AlSI10Mg samples produced with the powder bed laser fusion technique. Thermocalc software was used to ...

• İslam Öncesi ve Sonrası ile Ayasofya Camii Geometrik Desenlerinin Mukayeseli Analizi 

  Sönmez, Serap Ekizler (İstanbul Üniversitesi Yayınevi, 2024)

  Bu çalışmada Ayasofya Camii’nde yer alan geometrik desenlerin pergel-cetvel (çizgilik) konstrüksiyonu ile çizimine ve arkalarında yatan geometrik sistemlere odaklanılmıştır. Neredeyse tüm İslam coğrafyasında sayısız örnekle ...

• Enhancement of Cytotoxic and Apoptotic Activity Through Oolong Tea Extract-mediated CuO/Cu2O Nanoparticles 

  Karakuş, Emir Ersel; Sert, Esra; Erol, Ayşe; Kalındemirtaş, Ferdane Danışman; Özbaş, Fatih; Karakuş, Selcan (Elsevier, 2024)

  The development of multifunctional nanoformulations with enhanced anticancer activity and drug delivery potential is of increasing scientific importance. In this study, we synthesized and characterized copper oxide ...

• Sustainable Synthesis of Green Cu2O Nanoparticles using Avocado Peel Extract as Biowaste Source 

  Özbaş, Fatih (Turkish Chemical Society, 2024)

  In recent years, there has been a significant shift towards the production of advanced nanomaterials using sustainable methods, reflecting a heightened focus on reducing environmental impact and optimizing resource ...

• Microstructural, Hardness, and Wear Properties of Mg2Si-reinforced Al Matrix in-situ Composites Produced by Low Superheat Casting 

  Özkan, Tolga; Tutuk, İbrahim; Acar, Serhat; Gecu, Rıdvan; Güler, Kerem Altuğ (Elsevier, 2024)

  In this study, Mg2Si-reinforced A356 and A413 aluminum matrix composites were fabricated by low superheat casting using AM50 magnesium alloy as a source for the in-situ formation of Mg2Si particles. AM50 was added to each ...

• Investigation of Wear Behavior of PA 12 Matrix Ceramic Reinforced Composites Produced by Selective Laser Sintering Method 

  Kısasöz, Burçin Özbay; Tütük, İbrahim; Koç, Ebubekir; Karabeyoğlu, Sencer Süreyya; Kısasöz, Alptekin (Gazi University, 2024)

  In this study, ceramic-reinforced PA 12 matrix composites were fabricated by using Selective Laser Sintering (SLS) additive manufacturing method with different energy density values. Additionally, dry sliding wear tests ...

• Nanocomposites and Nanohybrids in Additive Manufacturing 

  Ertürk, A.T.; Özer, G. (De Gruyter, 2023)

  Additive manufacturing (AM) has undergone significant technological development since its emergence in the 1970s. This development is expected to continue and take an important place in the manufacturing sector. Developing ...

Daha Fazla