Yazar "Khan, Hamaid Mahmood" için listeleme

Challenges in Additive Manufacturing Technology: Post Processing, Design and Material’s Selection

Khan, Hamaid Mahmood; Waqar, Saad (Springer Nature, 2023)

It is important to bear in mind that additive manufacturing (AM) did not emerge in isolation but rather built upon earlier technologies. The rapid adoption of 3D printing technology across industries serves as a testament ...

Corrosion of Additively Manufactured Metallic Components: A Review

Khan, Hamaid Mahmood; Özer,Gökhan; Yılmaz, Mustafa Safa; Koç, Ebubekir (King Fahd University of Petroleum & Minerals, 2021)

The unique additive manufacturing (AM) attributes such as tool-less design, on-site fabrication, short production cycle, and complex structures fabrication can make AM market penetration deeper. The sustained improvements ...

Double Stud Cargo Fitting Research, Alternative Cargo Clip Design and Analysis

Çalışkan, Cemal İrfan; Koç, Ebubekir; Khan, Hamaid Mahmood; Bulduk, Mustafa Enes (Embry-Riddle Aeronautical University, 2019)

In air transportation, fixing the cargo inside the aircraft is important in terms of both flight safety and operational process. Positioning and fixing of the cargo to the aircraft within a short period of time without any ...

Dry Sliding Wear Behavior of 316 L Stainless Steel Produced by Laser Powder Bed Fusion: A Comparative Study on Test Temperature

Khan, Hamaid Mahmood; Yılmaz, Mustafa Safa; Karabeyoğlu, Süreyya Sencer; Kisasoz, Alptekin; Özer, Gökhan (Elsevier, 2023)

Laser powder bed fusion (LPBF) is becoming more popular and widely acceptable class of the additive manufacturing processes for metallic objects. The impact of test temperatures, sliding speed, and loading conditions on ...

Effect of Aging and Finish Machining on the Surface Integrity of Selective Laser Melted Maraging Steel

Taşçıoğlu, Emre; Khan, Hamaid Mahmood; Kaynak, Yusuf; Coşkun, Mert; Tarakçı, Gürkan; Koç, Ebubekir (Emerald Publishing Limited, 2021)

Purpose – The present study aims to investigate the effect of finish machining and aging processes on the surface integrity of the selective laser melted (SLM) maraging steel samples and compared them with those obtained ...

Effect of Building Orientations and Heat Treatments on Alsi10mg Alloy Fabricated by Selective Laser Melting: Microstructure Evolution, Mechanical Properties, Fracture Mechanism and Corrosion Behavior

Tarakçı, Gürkan; Khan, Hamaid Mahmood; Yılmaz, Mustafa Safa; Özer, Gökhan (Emerald Publishing Limited, 2022)

Purpose – The present paper aims to systematically investigate the influence of building orientations (0°, 15°, 30°, 45°, 60°, 75°) and heat treatment processes on the macro-/micro-structural, mechanical and electrochemical ...

The Effect of Conformal Cooling Channels on Welding Process in Parts Produced by Additive Manufacturing, Laser Powder Bed Fusion

Çalışkan, Cemal İrfan; Khan, Hamaid Mahmood; Özer, Gökhan; Waqar, Saad; Tütük, İbrahim (Elsevier, 2022)

Given the excellent performance in making lighter, customizable, strong, and aesthetically attractive components at a reduced time and cost, additive manufacturing (AM) presents an unparalleled approach to extending and ...

Effect of Heat Treatments on the Microstructure and Wear Behaviour of A Selective Laser Melted Maraging Steel

Özer, Gökhan; Khan, Hamaid Mahmood; Tarakçı, Gürkan; Yılmaz, Mustafa Safa; Yaman, Paşa; Karabeyoğlu, Sencer Süreyya; Kısasöz, Alptekin (SAGE, 2022)

This study applied classical and intercritical heat treatments to maraging steel (MS1) samples produced with standard additive manufacturing (AM) production parameters. The effects of heat treatment parameters on the ...

Estimation of the Compression Strength and Surface Roughness of the As-Built SLS Components Using Weibull Distribution

Khan, Hamaid Mahmood; Tarakçı, Gürkan; Bulduk, Mustafa Enes; Koç, Ebubekir (Yıldız Teknik Üniversitesi, 2021)

Selective laser sintering (SLS) is a process of fabrication of three-dimensional structures by fusing powder particles using a guided laser source. The uncertainty in the mechanical properties of the SLS parts fabricated ...

Evolution of Temperature and Residual Stress Behavior in Selective Laser Melting of 316L Stainless Steel Across a Cooling Channel

Khan, Hamaid Mahmood; Waqar, Saad; Koç, Ebubekir (Emerald Publishing Limited, 2022)

Purpose – The current investigation aims at observing the influence of the cooling channel on the thermal and residual stress behavior of the selective laser melting (SLM)316L uni-layer thermo-mechanical model. Design/ ...

A Hybrid Feature Selection Approach Based on LSI for Classification of Urdu Text

Rasheed, Imran; Banka, Haider; Khan, Hamaid Mahmood (Springer, 2021)

The feature selection method plays a crucial role in text classification to minimizing the dimensionality of the features and accelerating the learning process of the classifier. Text classification is the process of ...

Hybrid Material Usage in TPMS Forms Fabricated by Additive Manufacturing, Comparison of Mechanical Strength of Lattices Produced With Alsi10mg and 7050

Çalışkan, Cemal İrfan; Khan, Hamaid Mahmood; Ural, Mehmet Moğoltay (Elsevier Ltd., 2023)

Aluminum-based cellular structures are gaining significant attention across industries due to their lightweight and impressive mechanical properties. With the advent of additive manufacturing (AM), complex periodic cellular ...

Improvement of Corrosion Resistance of Maraging Steel Manufactured by Selective Laser Melting Through Intercritical Heat Treatment

Khan, Hamaid Mahmood; Özer, Gökhan; Yılmaz, Mustafa Safa; Tarakçı, Gürkan (Natl Assoc Corrosion Eng, 2022)

Selective laser melting allows the layerwise fabrication of bespoke designs, creating new prospects in applications and properties compared to conventional methods. Like other ultra-high-strength steels, maraging steels ...

Influence of the Post-Processing Operations on Surface Integrity of Metal Components Produced by Laser Powder Bed Fusion Additive Manufacturing: a Review

Khan, Hamaid Mahmood; Karabulut, Yusuf; Kitay, Özhan; Kaynak, Yusuf; Jawahir, I. S. (Taylor & Francis Group, 2021)

As industries are increasingly adopting the laser powder bed fusion (LPBF) additive manufacturing (AM) process, it is crucial to understand the process closely and to find ways to improve the final quality of the finished ...