Yazar "Tütük, İbrahim" için listeleme
-
The Application of the Direct Water Cooling Process on the Lost-Foam Casting Technique to Improve Microstructural and Mechanical Properties of A356 Alloy
Tütük, İbrahim; Acar, Serhat; Güler, Kerem Altuğ (Springer, 2023)Lost-foam casting (LFC) is one of the most straightforward techniques to produce complex shaped parts with intricate geometries. However, obtained microstructures are generally coarse in nature due to the slow solidification ... -
Development of an Alternative Heat Treatment to the Traditional T6 Heat Treatment of AlSi10Mg Alloy Produced by Additive Manufacturing
Tütük, İbrahim; Ural, Mehmet Moğoltay; Yılmaz, Mustafa Safa; Özer, Gökhan (Springer, 2024)In this study, alternative solution heat treatments, applied at lower temperatures and shorter times, were applied to AlSI10Mg samples produced with the powder bed laser fusion technique. Thermocalc software was used to ... -
The Effect of Conformal Cooling Channels on Welding Process in Parts Produced by Additive Manufacturing, Laser Powder Bed Fusion
Çalışkan, Cemal İrfan; Khan, Hamaid Mahmood; Özer, Gökhan; Waqar, Saad; Tütük, İbrahim (Elsevier, 2022)Given the excellent performance in making lighter, customizable, strong, and aesthetically attractive components at a reduced time and cost, additive manufacturing (AM) presents an unparalleled approach to extending and ... -
Electrochemical Corrosion Behaviour of UNS S32205 Duplex Stainless Steel Dependent on Sigma Phase Precipitation
Kısasöz, Burçin Özbay; Tütük, İbrahim; Acar, Serhat; Kısasöz, Alptekin (De Gruyter, 2024)In this study, the microstructure and electrochemical corrosion behavior of the UNS S32205 alloy were investigated. Firstly, the phase diagram of the studied samples was determined by Thermo-Calc 2022 software, and the ... -
Influence of Solution Treatment Process on the Properties of Duplex Stainless Steels: A Comparative Study on Microstructure and Corrosion Properties of UNS S32205 and UNS S32760
Tütük, İbrahim; Ural, Mehmet Moğoltay; Özer, Gökhan; Kısasöz, Alptekin (Springer, 2024)The study investigated the effect of the solution treatment process on the corrosion behavior and microstructure of the duplex stainless steel. It was also aimed to reveal this effect comparatively depending on the ... -
Investigation of Wear Behavior of PA 12 Matrix Ceramic Reinforced Composites Produced by Selective Laser Sintering Method
Kısasöz, Burçin Özbay; Tütük, İbrahim; Koç, Ebubekir; Karabeyoğlu, Sencer Süreyya; Kısasöz, Alptekin (Gazi University, 2024)In this study, ceramic-reinforced PA 12 matrix composites were fabricated by using Selective Laser Sintering (SLS) additive manufacturing method with different energy density values. Additionally, dry sliding wear tests ... -
Microstructure and Wear Characteristics of Hybrid Reinforced (ex-situ SiC–in-situ Mg2Si) Al Matrix Composites Produced by Vacuum Infiltration Method
Birsen, Dilara; Tütük, İbrahim; Acar, Serhat; Karabeyoğlu, Sencer Süreyya; Özer, Gökhan; Güler, Kerem Altuğ (Elsevier, 2023)Hybrid composite materials combine the advantages of two or more reinforcement materials and may contain unique physical, mechanical and tribological properties that cannot be achieved with any other materials. In ... -
Microstructure Evolution of AlSi10Mg Alloy in RAP Process
Tütük, İbrahim; Acar, Serhat; Özer, Gökhan; Güler, Kerem Altuğ (De Gruyter, 2024)With its computer-aided layer-by-layer production approach, additive manufacturing (AM) and powder bed laser fusion (PBLF) paved the way to produce metallic parts more precisely than any other manufacturing technique. However, ...
