• A Bibliometric Review of The Knowledge Base on Mentoring for The Professional Development of School Administrators 

  Yirci, Ramazan; Karaköse, Turgut; Kocabaş, İbrahim; Tülübaş, Tijen; Papadakis, Stamatios (MDPI, 2023)

  Mentoring for the professional development of school administrators has become widely acknowledged as an essential means of providing psychosocial and career support, particularly for novice administrators. Due to its ...

• Post‑Process Drilling of AlSi10Mg Parts by Laser Powder Bed Fusion 

  Ertürk, Alpay Tamer; Yarar, Eser; Özer, Gökhan; Bulduk, Mustafa Enes (Springer, 2023)

  In the last decade, additive manufacturing (AM) technologies have had an extraordinary research interest in each of the relevant topics: essential manufacturing method development, raw materials, optimization of process ...

• A Comparison of Different Loss Computations in Siamese Networks for Authorship Verification 

  Gülcü, Ayla; Özkan, İsmail Taha Samed; Karakuş, Osman Furkan (Springer, 2023)

  In this study, we consider the author verification problem as a binary classification problem where the aim is to identify whether the two inputs belong to the same author or not. For this task, we have used several ...

• Effect of Time Step Interval and Time Integration Schemes in Pseudo-Dynamic Analysis 

  Öztürk, Sezer; Doran, Bilge; Aksoylar, Cenk (Elsevier, 2023)

  Pseudo Dynamic Analysis technique is an alternative method for exploring structural performance by combining analytical and experimental investigation. Compared to shake table tests, it is a more economical method, and ...

• Performance‑Enhanced S‑Shaped Slotted Patch Antenna for X Band/Ku Band Applications 

  İmeci, Ş. Taha; Tütüncü, Bilal; Herceg, Lamija (Springer, 2023)

  Design and performance enhancement of an S-shaped antenna with two additional slits and slots is presented. Initially, a parametric study was performed with two commonly used dielectric materials. First, FR4 with ɛr=4.3 ...

• Dry Sliding Wear Behavior of Energy Density Dependent PA 12/Cu Composites Produced by Selective Laser Sintering 

  Kısasöz, Burçin Özbay; Koç, Ebubekir; Kısasöz, Alptekin; Karabeyoğlu, Sencer Süreyya (De Gruyter, 2023)

  The selective laser sintering process is widely used to fabricate polyamide matrix composites. Although various reinforcements are used to produce polyamide matrix composites, metallic-based reinforcements are used to ...

• Precipitation of Carbides in A Nickel-Based Cast Heat-Resistant Alloy During Thermal Exposure: Evolution of Microstructure, Hardness and Corrosion Properties 

  Öztürk, Kubilay; Kısasöz, Alptekin; Özer, Gökhan; Karaaslan, Ahmet (De Gruyter, 2023)

  Ni-based G-NiCr28W alloy, which is widely preferred in high-temperature applications, has an austenite matrix as well as carbides dispersed in the structure. The morphology of the carbides in the structure varies depending ...

• Hardware Acceleration of FIR Filter Implementation on ZYNQ SoC 

  Tatar, Güney; Bayar, Salih; Çiçek, İhsan (IEEE, 2022)

  Finite impulse response (FIR) filters are widely used in electronic design applications such as digital signal processing, image processing and digital communications. The demand for high performance is increasing ...

• Psychometric Properties of Turkish Version of the Interpersonal Affect Improvement Strategies Questionnaire (IAISQ) 

  Turgut, Tuğba; Çetintaş, Şeyda; Belet, Eda Öztürk; Avcu, Akif (2022)

  The aim of this study was to adapt the Interpersonal Affect Improvement Strategies Questionnaire (IAISQ) into Turkish population, as well as to examine its validity and reliability estimates. The sample consisted of 610 ...

• Nanotechnology and COVID-19: Prevention, diagnosis, vaccine, and treatment strategies 

  Ayan, Sümeyra; Çiftci, Kübra Arancı; Çiftçi, Fatih; Üstündağ, Cem B. (Frontiers Media S.A., 2023)

  In December 2019, Coronavirus pandemic (COVID-19) caused by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) viruses, which affected the whole world, is emerged. The details on the epidemiology, infection ...

• PSCSO: Enhanced Sand Cat Swarm Optimization Inspired by the Political System to Solve Complex Problems 

  Kiani, Farzad; Anka, Fateme Aysin; Erenel, Fahri (Elsevier, 2023)

  The Sand Cat Swarm Optimization (SCSO) algorithm is a recently introduced metaheuristic with balanced behavior in the exploration and exploitation phases. However, it is not fast in convergence and may not be successful ...

• In Situ Synthesis and Cell Line Studies of Nano-Hydroxyapatite/Graphene Oxide Composite Materials For Bone Support Applications 

  Özder, Melike Nur; Çiftçi, Fatih; Rencüzoğulları, Özge; Arışan, Elif Damla; Üstündağ, Cem Bülent (Elsevier, 2023)

  The current work presents and discusses the findings of on the structural, chemical and thermal properties of in situ synthesis of graphene oxide-hydroxyapatite (GO/HA) nanocomposite materials doped with graphene oxide (w/w) ...

• Anadolu Köy Halılarında Motif ve Kompozisyon Çözümlemeleri 

  Uğurlu, Aydın; Uğurlu, Servet Senem (Atatürk Kültür Merkezi Başkanlığı, 2022)

  Anadolu köy halıları ve göçebe yaşamında dokunan halılar incelendiğinde; dokumacıların inanç, kutsallık, yaşam, yaşadıkları çevre bağlamında oluşturdukları önemli ve belirli özellikteki motifleri halılarda kullandıkları ...

• ‘Adaptation and Psychometric Evaluation of the Turkish Version of the Coronavirus Anxiety Scale’ Adlı Makaleye Cevap 

  Akkuzu, Hüdanur; Ladikli, Nefise (Bilişsel Davranışçı Psikoterapiler Derneği, 2022)

  Sayın Editör, Derginiz Journal of Cognitive-Behavioral Psychotherapy and Research’te yayımlanan “Adaptation and Psychometric Evaluation of the Turkish Version of the Coronavirus Anxiety Scale” (Koç ve Arslan, 2021) adlı ...

• “Geldi Bir Devre-i Matem Şiire”: Ölümü Üzerine Yazılanlar Çerçevesinde Muallim Nâci Biyografisini Yeniden Düşünmek 

  Koçak, Mesut (Yakup Yılmaz, 2022)

  Bu çalışma, Muallim Nâci'nin biyografisini, ölümü üzerine yazılan yazılar çerçevesinde yeniden inceleme fırsatına odaklanmaktadır. Ayrıca modern bir tür olarak biyografi yazmanın sorunlarını, özellikle Türk edebiyatı ...

• A Determination of the Corrosion and Microstructure Properties of AlSi10Mg Material Produced by Different Direct Metal Laser Sintering (DMLS) Process Parameters 

  Yılmaz, Mustafa Safa (Bitlis Eren Üniversitesi, 2022)

  Additive Manufacturing (AM) has been developing with increasing interest recently. The development of this technology will accelerate with the increase in material, process, and product quality. It is therefore essential ...

• Biophilic Architecture and Water: Examining Water as A Spatial Sensory Element 

  Katuk, Damla; Köseoğlu, Emine (Assoc. Prof. Nilay Özsavaş Uluçay, 2022)

  Biophilic design can be briefly summarized as a concept affecting human well-being and nature. Thus, the inclusion of water in architectural designs has attracted attention. The purpose of this study is to evaluate the ...

• Gan Güç Anahtarları İle Gerçeklenen Yarım Köprü Geliştirme Kartının Isıl Başarımının İncelenmesi 

  Göksu, Ömer Faruk; Gülbahçe, Mehmet Onur; Düşmez, Serkan (Süleyman Demirel Üniversitesi Mühendislik Fakültesi, 2022)

  GaN FET anahtarlar ufak paket boyutlarına sahip olması ve yüksek çalışma gerilimakım değerlerini yüksek anahtarlama frekanslarında sağlayabilmesinden dolayı güç elektroniği çeviricilerinde yeni ufuklar açmıştır. Bu çalışma ...

• Haksız Rekabet ile Rekabet Hukuku Arasındaki İlişkinin Fiyat Tarifeleri Kapsamında Değerlendirilmesi 

  Şenol, Pınar Uzun (Sakarya Üniversitesi, 2021)

  Özgür ve dürüst rekabetin yasal dayanakları ve bu anlamda etkin bir rekabetin teminatı olan haksız rekabet ile rekabet hukukunun terminolojik açıdan birbirine benzemesine rağmen farklı hukuk alanlarını oluşturmaları, yakın ...

• İkidilli Çocuğun İlk Cümle Oluşum Süreçlerine Bir Bakış (18-27 Aylar) 

  Çelik, Muhammet (Şarkiyat Araştırmaları Derneği, 2022)

  İnsana özgü dil edinim yeteneğiyle dünyaya gelen çocuğun konuşma süreci, tek sözcük döneminden itibaren cümle hükmündeki kelimelerin telaffuzuyla başlayıp, iki veya daha fazla kelime kullanılarak ilk cümle yapılarını ...

View more