Ara
Toplam kayıt 19, listelenen: 1-10
Effect of Secondary Phases on 475°C Embrittlement of 1.4462 and 1.4501 Duplex Stainless Steels at Short-term Heat Treatment Conditions
(IOP Publishing Ltd, 2019)
Duplex stainless steels (DSSs) are classified according to their chemical composition. Also, the
formation of the secondary phases can be defined as a main problem of the DSSs. In this study,
decomposition of chromium ...
Effect of RRA Heat Treatment on Corrosion and Mechanical Properties of AA7075
(Wiley, 2019)
In this study, a retrogression process (R) has been applied to AA7075 at
180, 240, and 370°C for 15, 30, 90, and 120 min. After the retrogression,
reaging treatment (RA) was reapplied with T6 conditions (120°C for 24 ...
Influence of The Phase Balance and Cooling Conditions on The Microstructure and Corrosion Behavior of Solution-treated 1.4462 Duplex Stainless Steel
(IOP Publishing, 2019)
In this study, effect of cooling rate on the microstructure and corrosion behavior of the solutiontreated
1.4462 alloy was investigated. 1.4462 alloy was heat-treated at 1000 °C, 1120 °Cand 1200 °C
for different duration ...
The Effect of Retrogression and Re-Aging Treatment on Mechanical and Tribological Features of AA7075 Aluminium Alloy
(Wiley-VCH GmbH, 2019)
In this study, T651-applied AA7075 alloy was subjected to retrogression and reaging (RRA) process. Various retrogression temperatures (180 °C, 280 °C, 370 °
C) and times (15 min, 30 min, 90 min) were used to determine the ...
Numerical Investigation of Heat Current Study Across Different Platforms in SLM Processed Multi-Layer AlSi10Mg
(Elsevier, 2018)
Selective Laser Melting (SLM) of three dimensional multi-layer model is being numerically investigated
using finite element method with academic ANSYS software. The temperature distribution
and melt pool formation with ...
Parameters Optimization for Horizontally Built Circular Profiles: Numerical and Experimental Investigation
(Elsevier, 2018)
Selective laser melting (SLM), a type of additive manufacturing (AM) process, is chosen for
direct fabrication of powder-based functional metallic objects. The designing of small circular
geometries or overhang surfaces ...
Investigation of Elemental Distribution in the Sheet Sections After Aluminum Continuous Sheet Casting, Cold Rolling and Heat Treatment Processes
(TMS Annual Meeting & Exhibition, 2018)
Aluminum is used in millions of different products in
many diverse industries from the aerospace industry to
the food industry. Owing to its low density, high strength
when alloyed, high elasticity, recyclability, high ...
Applying High Voltage Cathodic Pulse with Various Pulse Durations on Aluminium Via Micro-Arc Oxidation (MAO)
(Elsevier, 2017)
The present study is an investigation of the effect of pulse duration on properties of coatings
formed on aluminium alloy (Al) in alkaline solution via using of high voltage cathodic pulses.
Nine different anodic-cathodic ...
Cooling Slope Casting of AA7075 Alloy Combined with Reheating and Thixoforging
(Elsevier, 2019)
Cooling slope casting has been applied to aluminium casting alloys for producing ingots with non-dendritic
microstructure. Semi-solid forming of the AA7075 was studied via cooling slope casting, reheating and thixoforging ...
Support Optimization for Overhanging Parts in Direct Metal Laser Sintering
(Elsevier, 2019)
The present work focuses mainly on the utilization of different support profiles for overhang
structures in EOS M290 Direct Metal Laser Sintering (DMLS) machine. Maraging steel (MS1)
parts with large overhangs were ...