Ara
Toplam kayıt 12, listelenen: 1-10
Improving the Surface Quality and Mechanical Properties of Selective Laser Sintered PA2200 Components by the Vibratory Surface Finishing Process
(Springer, 2021)
This paper attempts to improve the physical and mechanical properties of selective laser sintered polyamide PA2200
components through a vibratory surface finishing process by inducing severe plastic deformation at the ...
Effect of HIP Process and Subsequent Heat Treatment on Microstructure and Mechanical Properties of Direct Metal Laser Sintered AlSi10Mg Alloy
(Emerald, 2020)
Purpose – The purpose of this paper is to evaluate the effect of post process combinations, e.g. hot isostatic pressing (HIP) only, HIP 1 T6 heat
treatments, and T6 only, with different aging time, on surface properties, ...
Support Optimization for Overhanging Parts in Direct Metal Laser Sintering
(Elsevier, 2019)
The present work focuses mainly on the utilization of different support profiles for overhang
structures in EOS M290 Direct Metal Laser Sintering (DMLS) machine. Maraging steel (MS1)
parts with large overhangs were ...
Benefits of Laser Beam Based Additive Manufacturing in Die Droduction
(Elsevier, 2019)
The aim of this study was to benefit from the novel design and production freedom of laser
manufacturing in order to alter the existing design concept of extrusion dies and to resolve the
limits in die production.
A ...
Investigation of Direct Metal Laser Sintering Downskin Parameters’ Sagging Effect on Microchannels
(Springer, 2021)
Additive manufacturing technology is an innovative and advantageous production technology in producing microchannels, heat
exchangers designed in complex geometries. Process parameters developed to provide production ...
Effect of Aging and Finish Machining on the Surface Integrity of Selective Laser Melted Maraging Steel
(Emerald Publishing Limited, 2021)
Purpose – The present study aims to investigate the effect of finish machining and aging processes on the surface integrity of the selective laser
melted (SLM) maraging steel samples and compared them with those obtained ...
Investigation of Manufacturability and Efficiency of Micro Channels with Different Geometries Produced by Direct Metal Laser Sintering
(Springer, 2021)
Manufacturability without supports in design studies for additive manufacturing (AM) brings many advantages such as time,
cost, part surface quality, and design freedom. It is thought that the geometries that can be ...
Unmanned Aerial Vehicle Production with Additive Manufacturing
(Online, 2020)
In this study, unmanned aerial vehicle (UAV) design, analysis and production was made using selective laser sintering (SLS) system. Four different aircraft bodies were designed in the interdisciplinary project, one of the ...
Corrosion of Additively Manufactured Metallic Components: A Review
(King Fahd University of Petroleum & Minerals, 2021)
The unique additive manufacturing (AM) attributes such as tool-less design, on-site fabrication, short production cycle, and
complex structures fabrication can make AM market penetration deeper. The sustained improvements ...
Evolution of Temperature and Residual Stress Behavior in Selective Laser Melting of 316L Stainless Steel Across a Cooling Channel
(Emerald Publishing Limited, 2022)
Purpose – The current investigation aims at observing the influence of the cooling channel on the thermal and residual stress behavior of the
selective laser melting (SLM)316L uni-layer thermo-mechanical model.
Design/ ...