Investigation of the Effects of Different Heat Treatment Parameters on the Corrosion and Mechanical Properties of the AlSi10Mg Alloy Produced with Direct Metal Laser Sintering

Basit Öğe Kaydı
dc.contributor.authorÖzer, Gökhan
dc.contributor.authorTarakçı, Gürkan
dc.contributor.authorYılmaz, Mustafa S.
dc.contributor.authorÖter, Zafer Çağatay
dc.contributor.authorSürmen, Ömer
dc.contributor.authorAkça, Yaşar
dc.contributor.authorCoşkun, Mert
dc.contributor.authorKoç, Ebubekir
dc.date.accessioned2021-04-27T12:17:44Z
dc.date.available2021-04-27T12:17:44Z
dc.date.issued2019en_US
dc.departmentFSM Vakıf Üniversitesi, Rektörlük, Alüminyum Test Eğitim ve Araştırma Merkezi (ALUTEAM)en_US
dc.description.abstractIn this study, AlSi10Mg samples produced by the direct metal laser sintering (DMLS) method were applied to heat treatment with different parameters (stress relief and T6). Heat‐treated and as‐built samples were subjected to intergranular corrosion test according to BS EN ISO 11846 standard. Hardness, tensile, electrical conductivity, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, and weight loss tests were applied to the samples. The corrosion, electrical conductivity, and mechanical properties of the DMLS‐AlSi10Mg material were investigated in detail depending on the heat‐treatment parameters.en_US
dc.identifier.citationÖZER, Gökhan, Gürkan TARAKÇI, Mustafa S. YILMAZ, Zafer Ç. ÖTER, Ömer SÜRMEN, Yaşar AKÇA, Mert COŞKUN & Ebubekir KOÇ. "Investigation of the Effects of Different Heat Treatment Parameters on the Corrosion and Mechanical Properties of the AlSi10Mg Alloy Produced with Direct Metal Laser Sintering". Materials and Corrosion, 71.3 (2019): 365-373.en_US
dc.identifier.doi10.1002/maco.201911171
dc.identifier.endpage373en_US
dc.identifier.issn0947-5117
dc.identifier.issn1521-4176
dc.identifier.issue3en_US
dc.identifier.orcidhttps://orcid.org/0000-0001-5233-8896en_US
dc.identifier.scopus2-s2.0-85072043439
dc.identifier.scopusqualityQ2
dc.identifier.startpage365en_US
dc.identifier.urihttps://hdl.handle.net/11352/3364
dc.identifier.volume71en_US
dc.identifier.wosWOS:000484336600001
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.institutionauthorÖzer, Gökhan
dc.institutionauthorCoşkun, Mert
dc.institutionauthorTarakçı, Gürkan
dc.institutionauthorSürmen, Ömer
dc.institutionauthorKoç, Ebubekir
dc.language.isoen
dc.publisherWiley Online Libraryen_US
dc.relation.ispartofMaterials and Corrosion
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/embargoedAccessen_US
dc.subjectAlSi10Mgen_US
dc.subjectDirect Metal Laser Sinteringen_US
dc.subjectElectrical Conductivityen_US
dc.subjectİntergranular Corrosionen_US
dc.subjectMechanical Propertiesen_US
dc.titleInvestigation of the Effects of Different Heat Treatment Parameters on the Corrosion and Mechanical Properties of the AlSi10Mg Alloy Produced with Direct Metal Laser Sinteringen_US
dc.typeArticle

Dosyalar

Orijinal paket

Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
Özer.pdf
Boyut:
2.66 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Ana Makale
İndir

Lisans paketi

Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
license.txt
Boyut:
1.44 KB
Biçim:
Item-specific license agreed upon to submission
Açıklama:
İndir

Koleksiyon

Alüminyum Test Eğitim ve Araştırma Merkezi (ALUTEAM)
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu